Treadmill Q. VADIS 12.0 NorsK

• This is a class HB treadmill in accordance with EN ISO20957-1/6.
• Max. Max. load capacity 150 kg.
• The treadmill may only be used for its intended purpose!
• Any other use is unauthorised and potentially dangerous. The importer cannot be held responsible for damage caused by improper use.
• You are training with a device that has been designed according to the latest safety standards. Possible sources of danger that could cause injury have been eliminated as far as possible. To avoid injuries and/or accidents, please read and follow these simple rules:

1. Do not allow children to play with or near the appliance.
2. Check regularly that all screws, nuts and handles are tight.
3. Replace defective parts immediately and do not use the appliance until they have been repaired. Also pay attention to any material fatigue.
4. Avoid high temperatures, moisture and splashes of water.
5. Read the operating instructions carefully before using the appliance.
6. The appliance requires sufficient clearance in every direction, at least 2 metres to the rear and the width of the treadmill.
7. Place the device on a firm and level surface.
8. Do not exercise immediately before or after meals.
9. Always have yourself examined by a doctor before starting fitness training.
10. The safety level of the device can only be guaranteed if you check the wearing parts at regular intervals. These are marked with * in the parts list.
11. Under no circumstances should exercise equipment be used as play equipment.
12. Do not stand on the housing.
13. Do not wear loose clothing, but suitable training clothing such as a tracksuit.
14. Wear shoes and never train barefoot.
15. Ensure that there are no third parties in the vicinity of the device, as other people could be injured by the moving parts.
16. The training device must not be set up in damp rooms (bathroom) or on the balcony.
17. Ensure that the device is earthed during training. Unsuitable earthing can cause an electric shock in the event of a malfunction.
18. Repairs in the motor area may only be carried out by a qualified electrician.
19. Ensure that the power cable and the treadmill are at a sufficient distance from hot sources.
20. Position the treadmill so that you can see third parties approaching.

The area of application for this training device is the home. The device fulfils the requirements of EN ISO20957-1/6 class HB. The CE marking refers to EC Directive 2004/108/EC; 98/37/EC, 2006/42/EC and 2006/95/EC. Improper use of this device (e.g. excessive training, incorrect settings, etc.) may result in damage to health.

Before starting training, a general examination should be carried out by your doctor to rule out any health risks.